Discover new strength using the CYCOGS® brand, powerful modular Compact Gear Motor. (CGM)

CYCOGS® CGM Specifications:

Compact Gear Motor side view

Load Force: 454 kg (1,000 lbs.) Maximum per unit.
Max. Speed (RPM): Approximately 240 RPM.
Electrical: two wire motor  ± 0-24 V DC approximately 200 watts continuous (0.27 Hp),  with short duration intermittent 2000 watts capacity.  (2.7 Hp)
Armature Inductance: Less than 100µH.
Gear Reduction: Redundant Pair Hypocyclic 25-to-1 reduction.  The hypocyclic or hypocycloid gear reduction consists of one gear migrating inside another gear.  Driven by an eccentric cam Similar to Cycloidal or Harmonic gear reductions.
Overall Width: 9.5 cm, depending on installation.
Outer Diameter: 14 cm.
Bolt Pattern: M8 x 8 equally spaced.
Weight: Under 7.7kg (17 lbs.)

Compact Gear Motor Gears

Please note:
The CYCOGS® CGM system is not waterproof or properly made for extended outside use or in wet or condensation prone environments.  In addition, the CGM system should not be operated in an excessively dusty or combustible or other hazardous environments.  Although the CGM systems movements may result in unexpected movements, personal and property damage may occur if used in an unsafe fashion or unsuitable environment.  Proper end-user design, operation, safeguarding, programming and training, among other safe operation tasks and safety procedures are recommended and remains the end-user’s responsibility.  OEM manufacturers and other purchasers of CYCOGS products and systems, as the purchaser, assumes responsibility and potential liability for safe implementation and use of these CYCOGS products and systems.

Please contact us here at the CYCOGS Company if you encounter additional questions or environmental application needs.

Sales E-mail:

The CYCOGS® CGM project is under ongoing development and offered in advance as a customized manufactured system; Standard models may not yet be available at this time.  As the CYCOGS development effort in core technology and key concepts continues, the CYCOGS Company reserves the right to progressively change some specifications and data or is not available or suitable for widespread dissemination for all products.  Pre-production information is not fully available for some specific products at this time.  Sensors, customizations and other integrations may result in an additional cost.

Liability Disclaimer:
The CYCOGS Company is not liable for the use, installation, performance or fitness of this component or system.  Your purchase properly indicates you fully assume the risk of its proper use and its subsequent installation and end user training and potential liability.  The CYCOGS Company patented intellectual property is strictly enforced and carefully protected.  The CYCOGS Company warranties the systems it sells from component defects or hardware failure for the period of one year after completing the purchase.

Please specify your design requirements and discover new strength using the CYCOGS® brand, powerful modular Compact Gear Motor (CGM)  Advanced orders may be accepted, please contact for quotes and purchase,CYCOGS sales for more information.

Sales E-mail:

The CYCOGS® Company is a privately owned, 100% American company and is based in the state of Wisconsin.
The CYCOGS OEM engineered products and systems are carefully designed, made, built and assembled in the state of Wisconsin, USA.
The CYCOGS Company strives to intentionally use American domestic components whenever possible.  Some of the key components may be sourced from the only available manufacturer, which may be owned, created or delivered from other countries.

Sales E-mail:
Manufactured in Wisconsin Logo Wisconsin Seal Wisconsin from Space