Experience using the CYCOGS® brand, awesome modular Electric Wheel Assembly (WA™)
Replace bulky transaxle wheel designs and axle-based wheel assemblies.
Compact: No axle, no transaxle required.
Heavy duty: The WA can typically support 1,000 lb. loads.
Modular: Easy bolt-on one or more CYCOGS Wheel Assemblies.
The CYCOGS®
single wheel mobility module (WA™) is the building block for the CYCOGS holonomic,
intelligent, dual wheel assembly module
(Hi2WAM™).
The CYCOGS wheel drive assembly is suitable for several types of mobility applications.
As a minimum driven configuration, a single-wheel drive assembly in a tricycle configuration would ideally allow a vehicle to move on most floor surfaces.
Incorporate two WA units and you have a
differential vehicle drive.
The WA wheel drive assembly is suitable for robotics, AGV’s, light fork lifts, motorized carts, wheel chairs, etc.
You properly supply the vehicle and drive electronics, and bolt on our wheel drive assembly.
The CYCOGS® WA™ system is not waterproof or properly made for extended outside use or in
wet or condensation prone environments.
In addition, the WA system should not be operated in an excessively dusty or combustible or other hazardous environments.
Although the WA systems movements may result in unexpected movements, personal and property damage may occur if used in an
unsafe fashion or unsuitable environment.
Proper end-user design, operation, safeguarding, programming and training, among other safe operation tasks and
recommended safety procedures are the end-user’s responsibility.
OEM manufacturers and other purchasers of CYCOGS products and systems,
as the purchaser, assumes responsibility and potential liability for safe implementation and use of these
CYCOGS products and systems.
The CYCOGS WA project is under ongoing development and offered in advance as a customized manufactured system;
Standard models may not yet be available at this time.
As the CYCOGS development effort in core technology and key concepts continues,
the CYCOGS Company reserves the right to progressively change some specifications and data or is not available or suitable for
widespread dissemination for all products.
Pre-production information is not fully available for some specific products at this time.
Sensors, customizations and other integrations may result in an additional cost.
Liability Disclaimer:
The CYCOGS Company is not liable for the use, installation, performance or fitness of this component or system.
Your purchase properly indicates you fully assume the risk of its proper use and its subsequent installation and
end user training and potential liability.
The CYCOGS Company patented intellectual property is strictly enforced and carefully protected.
The CYCOGS Company warranties
the systems it sells from component defects or hardware failure for the period of one year after completing the purchase.
Experience using the CYCOGS® brand, awesome modular Electric Wheel Assembly (WA™)
and specify your design requirements for quotes and purchase.
Advanced orders may be accepted, please contact CYCOGS sales for more information.
The CYCOGS® Company
is a privately owned, 100% American company and is based in the state of Wisconsin.
The CYCOGS OEM engineered products and systems are carefully designed, made, built and assembled in the state of Wisconsin, USA.
The CYCOGS Company strives to intentionally use American domestic components whenever possible.
Some of the key components may be sourced from the only available manufacturer, which may be owned, created or delivered from other countries.
For more specific information on the WA, click here.
