Technical Information and Order specification page for the CYCOGS® brand, Robot Emergency Stop System (RESS)



The CYCOGS® brand Robot Emergency Stop System RESS is a manually operated Emergency stop or E-Stop (Kill Switch) that is a device or system to stop and interrupt system power for shutting down an operating system and / or vehicle-system electronics and systems. 

(Stopping activity)  The RESS is a circuit interrupter designed and available for several power levels.  The CYCOGS® Company as an OEM supplier has developed this E-Stop system for OEM manufacturers, hobbyist, consumers, and other uses.  As an engineered system, your system requirements will determine the design specifications for the RESS, as one size will not fit all cases.  CYCOGS provides you with a system to meet your design goals using high quality components, generous over capacity and yet a cost-efficient solution.

Note:
You as the end user or OEM, must insure the proper operation, maintenance, instruction and configuration.  Placing the emergency control shutoff switch in a poor location will yield unfortunate results.  An emergency switch not actuated (pressed) in an emergency is useless Emergency Stop Systems Education page

The purchaser and end users assume full responsibility and liability for the safe usage and operation of the emergency switch.  For example, if your system increases its supply power or output load use capability, the CYCOGS® RESS must be updated also.

This is a custom order system / device, as each application is unique.
Use our selector to pick your system.  If you do not identify the combination you need, let the CYCOGS Company know.

Let us know your requirements and we can engineer a system that satisfies your requirements, system power and work loads. 

Furthermore, you can specify cable lengths, connectors, distribution blocks, polarity alarm alerts, indicators, key lockouts, etc.  If you need it, we can manufacture it.

Robot Emergency Stop Switch view Technical image

Utilizing our E-Stop system allows you to focus on your design.  No need to consume the time and efforts on technical designs or its development.  Plus knowing the system will work as designed.

Note:  If your system parameters change, such as higher power use, the CYCOGS® RESS may need upgrading to maintain its proper operation and safety features.  Please contact us to develop and maintain this system and your requirements.

Protect yourself and your robotic or automated equipment with the CYCOGS® brand, Robot Emergency Stop System (RESS). 



Sales E-mail: sales@CYCOGS.com


Contact: Send questions and comments about this web site to the CYCOGS® Contact.


CYCOGS® RESS Robot Emergency System



Select your System,    Copy this form into your contact message.

Standard Systems Selector:
12 Volt AC 5 Amp system  one E-stop switch
12 Volt DC 5 Amp system  one E-stop switch
24 Volt DC 10 Amp system  one E-stop switch
24 Volt AC 4 Amp system  one E-stop switch
48 Volt DC 20 Amp system  one E-stop switch
120 Volt AC 15 Amp system  one E-stop switch


Please use the CYCOGS System Selector to help craft and design a E-Stop system for your robot or project. 

Please take care in determining your needs, supply and load characteristics, user interface and serviceability.  We can assist you in selecting the most effective system for your needs.  If you have some specific non-standard needs and features or something not listed, please let us know.

Non-Standard Systems Selector:

AC DC Quantity Options
Supply Voltage
Snubber Type
Continuous Amperage
Reverse Polarity Detection
Number of E-Stop Switches
Docking Station Supply
Contactor or Load Relay
Power Connector
Cable Length to System
Computer Control
Cable Length Coupler to System
Wireless Control
E-Stop Cable Length
Voltage Control
Output Cable Length
Water Resistance
Capacity
Name and Phone number
Shipping Address
Design notes, comments or specific requests.


A note on sizing: If you design runs continuously on 20Amps with a spike of 40Amps, using a 20Amp circuit could trip out or blow the fuse.  Using a 30Amp circuit would be more suitable.  However, using a 50Amp circuit could result in more costs, heavy wiring and components than your system may need, moving your point of falure to your expensive components. 

This quote will be sent to you and will be verified after your order.  The CYCOGS® RESS E-Stop system will be manufactured to your specifications and shipped.  The precise component combinations are endless.  As such a semi-custom order, your RESS system is not prebuilt and in stock.


Please specify your design requirements for quotes and purchase.
Advanced orders may be accepted, please contact us here at the CYCOGS® Company if you encounter additional questions, information requests, or environmental application needs.

Sales E-mail:  sales@CYCOGS.com


Please note:
The CYCOGS® RESS system is not waterproof nor properly made for extended outside use, including in wet or condensation prone environments.  In addition, the RESS system should not be operated in an excessively dusty, combustible or other hazardous environments.  Although in RESS protected systems, normal operation may result in unexpected movements or actions, personal and property damage may occur if used in an unsafe fashion or unsuitable environment.  Proper end-user design, operation, safeguarding, programming and training, among other safe operation tasks and safety procedures are recommended and remains the end-user’s responsibility.  OEM manufacturers, end users and other purchasers of CYCOGS products and systems, as the purchaser, owner or user, assumes full responsibility, liability and any other potential liability for safe implementation and use of the CYCOGS products and systems RESS Emergency Stop Switch System.

The CYCOGS® RESS project is under ongoing development and offered in advance as a customized manufactured system; Standard models may not yet be available at this time.  As the CYCOGS development effort in core technology and key concepts continues, the CYCOGS Company reserves the right to progressively change some specifications and data or is not available or suitable for widespread dissemination for all products.  Pre-production information is not fully available for some specific products at this time.  Sensors, customizations and other integrations may result in an additional cost.

Liability Disclaimer:
The CYCOGS Company is not liable for the use, installation, performance or fitness of this component or system.  Your purchase properly indicates you fully assume the risk of its proper use and its subsequent installation and end user training and potential liability.  The CYCOGS Company patented intellectual property is strictly enforced and carefully protected.  The CYCOGS Company warranties the systems it sells from component defects or hardware failure for the period of one year after completing the purchase.

The CYCOGS® Company is a privately owned, 100% American company and is based in the state of Wisconsin.
The CYCOGS OEM engineered products and systems are carefully designed, made, built and assembled in the state of Wisconsin, USA.
The CYCOGS Company strives to intentionally use American domestic components whenever possible.  Some of the key components may be sourced from the only available manufacturer, which may be owned, created or delivered from other countries.

Manufactured in Wisconsin Logo Wisconsin Seal Wisconsin from Space