Experience using the CYCOGS® brand, awesome modular Electric Wheel Assembly (WA)



CYCOGS® (WA)


Wheel Assembly thumb


Technical Specifications:

Wheel Diameter: 200mm  or Approximately 8".
Wheel Treads: For Indoor use, Red colored UV-Resistant Polyurethane.  Wheel tread is replaceable.  Wheel tread can be custom ordered for outdoor applications.
Wheel Widths: 24mm  or Approximately 1".
Width: 200mm  or Approximately 8".
Weight: Under 7.7kg.  (17lbs).
Linear Speed: Maximum Linear Speed is similar to fast walking.  1.524 M/sec  or approximately (60"/sec or 5' / sec  or 3.4 MPH).
Maximum Speed (RPM): Approximately 240 RPM.
Gear Reduction: Redundant Pair Hypocyclic 25-to-1 Reduction.  The Hypocyclic or Hypocycloid gear reduction consists of one gear migrating inside another gear.  Driven by an eccentric cam Similar to Cycloidal or Harmonic gear reductions.
Individual Wheel Load: Typical = 453.6kg  or ≈ 1,000 lbs.  Maximum per Unit.
Electrical: 2 wire Motor ± 0-24 V DC approximately 200 watts continuous (0.27 Hp),  with short duration intermittent 2000 watts capacity.  (2.7 Hp)  Armature Inductance less than 100µH.


Compact Gear Motor Gears

Note: this product is not recommended for outdoor or wet environments.

Please note:

The CYCOGS® WA system is not waterproof or made for extended outside use or in wet or condensation prone environments.  In addition, the WA system should not be used in an excessively dusty or combustible or other hazardous environments.  Although the WA systems movements may result in unexpected movements, personal and property damage may occur if used in an unsafe fashion or unsuitable environment.
  Proper end-user design, operation, safeguarding, programming and training, among other safe operation tasks and safety procedures are recommended and are the end-user’s responsibility.  OEM manufacturers and other purchasers of CYCOGS products and systems, as the purchaser, assumes responsibility and liability for safe implementation and use of these CYCOGS products and systems.

Please contact us here at the CYCOGS company if you have additional questions or environmental application needs.

Sales E-mail:  sales@CYCOGS.com


The CYCOGS WA project is under development and offered in advance as a customized manufactured system, standard models may not yet be available at this time.  As the CYCOGS development effort in core technology and concepts continues, the CYCOGS company reserves the right to change some specifications and data or is not available or suitable for public dissemination for all products.  Pre-production information is not fully available for some products at this time.
Sensors, customizations and other integrations may result in an additional cost.

Liability Disclaimer:

The CYCOGS company is not liable for the use, installation, performance or fitness of this component or system.  Your purchase indicates you assume the risk of its proper use and its subsequent installation and end user training and liability.  The CYCOGS company patented intellectual property is strictly enforced and protected.  CYCOGS company warranties the systems it sells from component defects or failure for the period of one year after purchase.

Please specify your design requirements for quotes and purchase.
Advanced orders may be accepted, please contact CYCOGS sales for more information.

Sales E-mail: sales@CYCOGS.com


The CYCOGS® company is a privately owned, 100% American company and based in the state of Wisconsin.
CYCOGS OEM engineered products and systems are designed, made, built and assembled in the state of Wisconsin, USA.
The CYCOGS company strives to use American domestic components whenever possible.  Some of the components may be sourced from the only available manufacturer, which may be owned, created or delivered from other countries.

Sales E-mail: sales@CYCOGS.com
Manufactured in Wisconsin Logo Wisconsin Seal Wisconsin from Space