An overview of the CYCOGS® brand, Robot Emergency Stop System (RESS)



The CYCOGS® Company as an OEM supplier has created this E-Stop system for OEM manufacturers, hobbyist, consumers, and other uses. 

As an engineered system, your system requirements will determine the design specifications for the RESS, as one size will not fit all cases.  CYCOGS provides you with a system to meet your design goals using high quality components, generous over capacity and yet a cost-efficient solution.

Note:
you as the end user or OEM, must insure the proper operation, maintenance, instruction and configuration.  Placing the emergency control shutoff switch in a poor location will yield poor results.  An Emergency switch not actuated (pressed) in an emergency is useless.  Emergency Stop Systems education page

The purchaser and end users assume full responsibility and liability for the safe usage and operation of the emergency switch.  For example, if your system increases its power or load capability, the CYCOGS® RESS must be updated also.

This is a custom order system / device, as each application is unique.
Use our selector to pick your system on the technical specifications page.  RESS Robot Emergency Stop System Technical and Ordering Specifications
If you do not see the combination you need, let the CYCOGS Company know.


Sales E-mail:  sales@CYCOGS.com


Let us know your requirements and we can engineer a system that suits your requirements, system power, and loads.  Further, you can specify cable lengths, connects, distribution blocks, polarity alarm alerts, indicators, key lockouts, etc.  If you need it, we can build it.

Robot Emergency Stop Switch view
Using our E-Stop system allows you to focus on your design.  No need to spend the time and efforts on technical designs or its development.  Plus knowing the system will work as designed.

Note:

If the system parameters change, such as higher power use, the CYCOGS® RESS may need upgrading to maintain its proper operation and safety features.  Please contact us to develop and maintain this system.

Sales E-mail: sales@CYCOGS.com


Please note:

The CYCOGS® RESS system is not waterproof or properly made for extended outside use or in wet or condensation prone environments.  In addition, the RESS system should not be operated in an excessively dusty or combustible or other hazardous environments.  Although the RESS systems movements may result in unexpected movements, personal and property damage may occur if used in an unsafe fashion or unsuitable environment.  Proper end-user design, operation, safeguarding, programming and training, among other safe operation tasks and safety procedures are recommended and remains the end-user’s responsibility.  OEM manufacturers and other purchasers of CYCOGS products and systems, as the purchaser, assumes responsibility and liability for safe implementation and use of these CYCOGS products and systems.

Please contact us here at the CYCOGS® Company if you encounter additional questions or environmental application needs.

Sales E-mail:  sales@CYCOGS.com


The CYCOGS® RESS project is under ongoing development and offered in advance as a customized manufactured system; Standard models may not yet be available at this time.  As the CYCOGS development effort in core technology and key concepts continues, the CYCOGS Company reserves the right to progressively change some specifications and data or is not available or suitable for widespread dissemination for all products.  Pre-production information is not fully available for some specific products at this time.  Sensors, customizations and other integrations may result in an additional cost.

Liability Disclaimer:

The CYCOGS Company is not liable for the use, installation, performance or fitness of this component or system.  Your purchase properly indicates you fully assume the risk of its proper use and its subsequent installation and end user training and potential liability.  The CYCOGS Company patented intellectual property is strictly enforced and carefully protected.  The CYCOGS Company warranties the systems it sells from component defects or hardware failure for the period of one year after completing the purchase.

Please review the overview of the CYCOGS® brand, Robot Emergency Stop System (RESS) in preparation to specify your design requirements for quotes and purchase.
Advanced orders may be accepted, please contact CYCOGS sales for more information.

Sales E-mail: sales@CYCOGS.com


The CYCOGS® Company is a privately owned, 100% American company and is based in the state of Wisconsin.
The CYCOGS OEM engineered products and systems are carefully designed, made, built and assembled in the state of Wisconsin, USA.
The CYCOGS Company strives to intentionally use American domestic components whenever possible.  Some of the key components may be sourced from the only available manufacturer, which may be owned, created or delivered from other countries.

Manufactured in Wisconsin Logo Wisconsin Seal Wisconsin from Space